MocKAT
Dashboard
FREE
Daily Quiz
Daily PoV
Daily News
PYQs
PREP
Study Plan
Quant
VARC
DILR
Speed
TESTS
Mocks & Tests
MORE
Info & Colleges
Plans & Pricing
Home›PYQs›CAT 2021›Slot 3 DILR
CAT 2021DILRSlot 3 · Evening

CAT 2021 Slot 3 DILR Question Paper with Solutions

40 Minutes20 QuestionsNov 28, 20213 marks correct · −1 wrong
Take Full Mock
Questions
0 / 20 answered0 correct0 wrong
RC

Passage 1 · CAT2021Slot3_DILR1 · 4 Questions

Read the following and answer the Questions that follow



The figure above shows the schedule of four employees – Abani, Bahni, Danni and Tinni – whom Dhoni supervised in 2020. Altogether there were five projects which started and concluded in 2020 in which they were involved. For each of these projects and for each employee, the starting day was at the beginning of a month and the concluding day was the end of a month, and these are indicated by the left and right end points of the corresponding horizontal bars. The number within each bar indicates the percentage of assigned work completed by the employee for that project, as assessed by Dhoni.

For each employee, his/her total project-month (in 2020) is the sum of the number of months (s)he worked across the five project, while his/her annual completion index is the weightage average of the completion percentage assigned from the different projects, with the weights being the corresponding number of months (s)he worked in these projects. For each project, the total employee-month is the sum of the number of months four employees worked in this project, while its completion index is the weightage average of the completion percentage assigned for the employees who worked in this project, with the weights being the corresponding number of months they worked in this project.
Q1CAT 2021 Slot 3 DILR
View Standalone Page
Which of the following statements is/are true?

I: The total project-month was the same for the four employees.
II: The total employee-month was the same for the five projects.
Q2CAT 2021 Slot 3 DILR
View Standalone Page
Which employees did not work in multiple projects for any of the months in 2020?
Q3CAT 2021 Slot 3 DILR
View Standalone Page
The project duration, measured in terms of the number of months, is the time during which at least one employee worked in the project. Which of the following pairs of the projects had the same duration?
Q4CAT 2021 Slot 3 DILR
View Standalone Page
The list of employees in decreasing order ofannual completion indexis:
RC

Passage 2 · CAT2021Slot3_DILR2 · 6 Questions

Read the following and answer the Questions that follow

10 players – P1, P2, … , P10 - competed in an international javelin throw event. The number (after P) of a player reflects his rank at the beginning of the event, with rank 1 going to the topmost player. There were two phases in the event with the first phase consisting of rounds 1, 2, and 3, and the second phase consisting of rounds 4, 5, and 6. A throw is measured in terms of the distance it covers (in meters, up to one decimal point accuracy), only if the throw is a ‘valid’ one. For an invalid throw, the distance is taken as zero. A player’s score at the end of a round is the maximum distance of all his throws up to that round. Players are re-ranked after every round based on their current scores. In case of a tie in scores, the player with a prevailing higher rank retains the higher rank. This ranking determines the order in which the players go for their throws in the next round.

In each of the rounds in the first phase, the players throw in increasing order of their latest rank, i.e. the player ranked 1 at that point throws first, followed by the player ranked 2 at that point and so on. The top six players at the end of the first phase qualify for the second phase. In each of the rounds in the second phase, the players throw in decreasing order of their latest rank i.e. the player ranked 6 at that point throws first, followed by the player ranked 5 at that point and so on. The players ranked 1, 2, and 3 at the end of the sixth round receive gold, silver, and bronze medals respectively.

All the valid throws of the event were of distinct distances (as per stated measurement accuracy).The tables below show distances (in meters) covered by all valid throws in the first and the third round in the event.

Distances covered by all the valid throws in the first round

PlayerDistance (in m)
P182.9
P381.5
P586.4
P682.5
P787.2
P984.1


Distances covered by all the valid throws in the third round

PlayerDistance (in m)
P188.6
P379.0
P981.4


The following facts are also known.
i. Among the throws in the second round, only the last two were valid. Both the throws enabled these players to qualify for the second phase, with one of them qualifying with the least score. None of these players won any medal.
ii. If a player throws first in a round AND he was also the last (among the players in the current round) to throw in the previous round, then the player is said to get a double. Two players got a double.
iii. In each round of the second phase, exactly one player improved his score. Each of these improvements was by the same amount.
iv. The gold and bronze medalists improved their scores in the fifth and the sixth rounds respectively. One medal winner improved his score in the fourth round.
v. The difference between the final scores of the gold medalist and the silver medalist, as well as the difference between the final scores of the silver medalist and the bronze medalist was 1.0 m.
Q5CAT 2021 Slot 3 DILR
View Standalone Page
Which two players got the double?
Q6CAT 2021 Slot 3 DILR
View Standalone Page
Who won the silver medal?
Q7CAT 2021 Slot 3 DILR
View Standalone Page
Who threw the last javelin in the event?
Q8CAT 2021 Slot 3 DILR
View Standalone Page
What was the final score (in m) of the silver-medalist?
Q9CAT 2021 Slot 3 DILR
View Standalone Page
Which of the following can be the final score (in m) of P8?
Q10CAT 2021 Slot 3 DILR
View Standalone Page
By how much did the gold medalist improve his score (in m) in the second phase?
RC

Passage 3 · CAT2021Slot3_DILR3 · 6 Questions

Read the following and answer the Questions that follow

Three reviewers Amal, Bimal, and Komal are tasked with selecting questions from a pool of 13 questions (Q01 to Q13).Questions can be created by external “subject matter experts” (SMEs) or by one of the three reviewers.Each of the reviewers either approves or disapproves a question that is shown to them. Their decisions lead to eventual acceptance or rejection of the question in the manner described below.

If a question is created by an SME, it is reviewed first by Amal, and then by Bimal. If both of them approve the question, then the question is accepted and is not reviewed by Komal. If both disapprove the question, it is rejected and is not reviewed by Komal. If one of them approves the question and the other disapproves it, then the question is reviewed by Komal. Then the question is accepted only if she approves it.

A question created by one of the reviewers is decided upon by the other two. If a question is created by Amal, then it is first reviewed by Bimal. If Bimal approves the question, then it is accepted. Otherwise, it is reviewed by Komal. The question is then accepted only if Komal approves it. A similar process is followed for questions created by Bimal, whose questions are first reviewed by Komal, and then by Amal only if Komal disapproves it. Questions created by Komal are first reviewed by Amal, and then, if required, by Bimal.

The following facts are known about the review process after its completion.
1. Q02, Q06, Q09, Q11, and Q12 were rejected and the other questions were accepted.
2. Amal reviewed only Q02, Q03, Q04, Q06, Q08, Q10, Q11, and Q13.
3. Bimal reviewed only Q02, Q04, Q06 through Q09, Q12, and Q13.
4. Komal reviewed only Q01 through Q05, Q07, Q08, Q09, Q11, and Q12.
Q11CAT 2021 Slot 3 DILR
View Standalone Page
How many questions were DEFINITELY created by Amal?
Type your answer
Q12CAT 2021 Slot 3 DILR
View Standalone Page
How many questions were DEFINITELY created by Komal?
Type your answer
Q13CAT 2021 Slot 3 DILR
View Standalone Page
How many questions were DEFINITELY created by the SMEs?
Type your answer
Q14CAT 2021 Slot 3 DILR
View Standalone Page
How many questions were DEFINITELY disapproved by Bimal?
Q15CAT 2021 Slot 3 DILR
View Standalone Page
The approval ratio of a reviewer is the ratio of the number of questions (s)he approved to the number of questions (s)he reviewed. Which option best describes Amal’s approval ratio?
Q16CAT 2021 Slot 3 DILR
View Standalone Page
How many questions created by Amal or Bimal were disapproved by at least one of the other reviewers?
RC

Passage 4 · CAT2021Slot3_DILR4 · 4 Questions

Read the following and answer the Questions that follow

Each of the bottles mentioned in this question contains 50 ml of liquid. The liquid in any bottle can be 100% pure content (P) or can have certain amount of impurity (I). Visually it is not possible to distinguish between P and I. There is a testing device which detects impurity, as long as the percentage of impurity in the content tested is 10% or more.

For example, suppose bottle 1 contains only P, and bottle 2 contains 80% P and 20% I. If content from bottle 1 is tested, it will be found out that it contains only P. If content of bottle 2 is tested, the test will reveal that it contains some amount of I. If 10 ml of content from bottle 1 is mixed with 20 ml content from bottle 2, the test will show that the mixture has impurity, and hence we can conclude that at least one of the two bottles has I. However, if 10 ml of content from bottle 1 is mixed with 5 ml of content from bottle 2. the test will not detect any impurity in the resultant mixture.

Q17CAT 2021 Slot 3 DILR
View Standalone Page
5 ml of content from bottle A is mixed with 5 ml of content from bottle B. The resultant mixture, when tested, detects the presence of I. If it is known that bottle A contains only P, what BEST can be concluded about the volume of I in bottle B?
Q18CAT 2021 Slot 3 DILR
View Standalone Page
There are four bottles. Each bottle is known to contain only P or only I. They will be considered to be “collectively ready for despatch” if all of them contain only P. In minimum how many tests, is it possible to ascertain whether these four bottles are “collectively ready for despatch”?
Type your answer
Q19CAT 2021 Slot 3 DILR
View Standalone Page
There are four bottles. It is known that three of these bottles contain only P, while the remaining one contains 80% P and 20% I. What is the minimum number of tests required to definitely identify the bottle containing some amount of I?
Type your answer
Q20CAT 2021 Slot 3 DILR
View Standalone Page
There are four bottles. It is known that either one or two of these bottles contain(s) only P, while the remaining ones contain 85% P and 15% I. What is the minimum number of tests required to ascertain the exact number of bottles containing only P?

About CAT 2021 Slot 3 DILR

The DILR section of CAT 2021 Slot 3 was conducted on November 30, 2021, the last Sunday of November — consistent with IIM's scheduling across all recent years. The section contains 24 questions to be answered in 40 minutes, carrying 72 marks in total. There is no sectional time limit within the overall exam, but students choosing to switch sections mid-paper lose the ability to return — making pacing within DILR critical.

Passage Topics in CAT 2021 Slot 3 DILR

CAT 2021 Slot 3 DILR featured four reading comprehension passages and a standalone Verbal Ability block. The RC passages spanned complexity theory and global systems, the aesthetics of electronic music, the economics of income inequality, and the legal history of criminal responsibility — a typical CAT spread across the sciences, humanities, and social sciences. The VA section included Para Jumbles, Para Summary, and Odd Sentence Out questions, consistent with the pattern since CAT 2019.

CAT 2021 DILR Marking Scheme

  • Correct answer (MCQ): +3 marks
  • Wrong answer (MCQ): −1 mark
  • Unattempted (MCQ): 0 marks
  • TITA questions (if any): +3 correct, no negative marking

How to Use This Question Paper

Click any answer option to immediately check your answer. The correct option is highlighted in green; if you selected the wrong option, it is shown in red and the correct answer is revealed. A detailed explanation appears below each question after you answer it, along with statistics showing what percentage of students answered correctly in the actual exam.

The question navigator at the top of the page updates in real time — green bubbles indicate correct answers and red indicate wrong. Use this to spot weak areas at a glance. To practice under timed conditions, use the Take Full Mock button to attempt the complete CAT 2021 Slot 3 paper with a live timer and percentile benchmarking.

Tips for CAT DILR Preparation

Reading Comprehension accounts for roughly two-thirds of the DILR section. The passages in CAT are dense and argumentative — they reward close reading of the author's position rather than skimming for facts. Practising on past papers is the most reliable way to calibrate your reading speed, improve inference accuracy, and recognise the types of questions IIM setters favour. Use the answer statistics on this page to benchmark yourself; questions where more than 50% of test-takers answered correctly are ones you should aim to get right every time.

Attempt Full CAT 2025 Mock

Take the complete Slot 1 paper with live timer, percentile, and section-wise analytics.

  • All 3 sections · 68 questions
  • Real exam timer & percentile rank
  • Detailed performance report
Take Full Mock
Vignesh & Sanjana
SELF STUDY
Your prep, planned daily.
Everything unlocked — and the Study Planner turns it into a simple day-by-day schedule.
TODAY
Weakest topic · Video Lesson
35 min
THU
L1 → L2 Practice Set
40 min
FRI
Booster Quiz ×2 + Speed Drill
30 min
✓120+ hours of Video Lessons
✓2400+ L1/L2/L3 Practice Questions
✓700+ Daily Quizzes
✓750 Booster Quizzes
✓Access to all Speed Modules
Upgrade to Self Study →
compare all plans

Other DILR Papers

CAT 2021 · All slots

    CAT 2021 Slot 2 DILR
    24Q · Nov 30, 2021
    ›
    CAT 2021 Slot 3 DILR
    24Q · Nov 30, 2021
    ›
    CAT 2020 Slot 1 DILR
    24Q · Nov 24, 2020
    ›
    CAT 2019 Slot 1 DILR
    24Q · Nov 26, 2019
    ›